Page 1
Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: CD4620 ViewSonic 46”...
Use the preset Size and Position controls with standard signals. Use the preset Color Setting. Use non-interlaced signals. Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Package Contents Your new CD4620 monitor box* should contain the following: LCD monitor Power Cord (1.8 m) Video Signal Cable (1.8 m) User’s Manual in CD Wizard Wireless Remote Control and AAA Batteries Quick Start Guide (A4) LCD monitor Quick Start Guide...
“ ” and “ ” and hold down simultaneously for more than 3 seconds. To resume back to user mode, press both of “ ” and “ ” and hold simultaneously for three (3) seconds. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
To output the audio signal from the AUDIO IN 1,2 and 3 jack. EXTERNAL CONTROL (mini D-Sub 9 pin) Connect the IN connector with the RS-232C OUT connector of the computer or a multi-connected CD4620 monitor. Connect the OUT connector with the RS-232C IN connector of CD4620 monitor.
MUTE button pic-ture. To switch the mute function on/off. Note: VOLUME - button increase The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. Decrease the audio output level. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately. Avoid exposure to heat and steam. Other than to install the batteries, do not open the remote. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 6. Operate the attached external equipment Display the signal on the external equipment you wish. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Page 15
“POWER SAVE”, “SCREEN SAVER”, “DATE AND TIME”, “SCHEDULE”. 11. When CD4620 is installed in portrait position Conditions CD4620 can be installed in portrait position, under the following conditions: Caution: Portrait position is effective only when wall-mounted or ceiling-mounted. The stands(legs) can not be fitted to the monitor in portrait position.
Use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them securely. (Recommended torque: 470 - 635N•cm). ViewSonic recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.
As shown in the figure, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor. (CD4620: approx. 34.6 kg) When you use screw hooks (commercially available), ring screw hooks, not C-shaped screw hooks (with opening), are recommended.
First turn off the power of all the attached equipment and make connections. Refer to the user manual included with each separate piece of equipment. Wiring Diagram LCD monitor (second monitor) Equipment with Digital interface ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
AUDIO INPUT button. You can select HDMI only when RGB 1 or 2 is selected. The AUDIO OUT jack outputs sound from the selected Audio input. To audio output To analog RGB output LCD monitor (second monitor) ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
AUDIO INPUT button. You can select HDMI only when RGB 1 or 2 is selected. The signal input from HDMI connector cannot be output to the RGB OUT connector. * Cables are not supply. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 1], [AUDIO 2], [AUDIO 3] or [HDMI] from the AUDIO INPUT button. You can select HDMI only when RGB 1 or 2 is selected. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUIDO1], [AUDIO2], [AUDIO3] or [HDMI] from the AUDIO INPUT button. You can select HDMI only when RGB 1 or 2 is selected. The AUDIO OUT jack outputs sound from the selected Audio input. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Before pressing the power button, be sure to turn on the Main Power button on the LCD monitor. 3. Using the remote control. NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
CUSTOM (ZOOM): Image can be expanded beyond the active display area. The image which is outside of active dia- play area is not displayed. REAL: Image will be displayed 1 by 1 pixel. ZOOM ZOOM ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
←Audio input mode ←Picture Size mode VIDEO<S>, VIDEO ←Video Input mode ←Input Signal Colour System mode ←Audio input mode ←Picture Size mode PIP or POP ←Main picture Information ←Sub picture Information ←Main picture Information ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Main menu. Press decide or – button to select Panel button to select. function, or control which you like. Press INPUT button to decide button INPUT button – or ﹢ button EXIT button Screen ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Selecting Picture reset allows you to reset all OSD settings about PICTURE setting. Select “Yes” and press “SET” button to restore to factory preset data. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Selecting Screen reset allows you to reset all OSD settings from PICTURE setting. Select “Yes” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Selecting Audio reset allows you to reset all OSD settings from AUDIO setting. Select “YES” and press “SET” button to restore the factory preset. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Selecting PIP Reset allows you to reset all OSD settings from PIP setting. Select “Yes” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and then return to the previous menu. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Selecting "YES" allows you to reset PICTURE, SCREEN, AUDIO, CONFIGURATION1,2 and ADVANCED OPTION will be back to factory settings (except LANGUAGE, DATE & TIME and SCHEDULE). Select "YES" and press "SET" button to restore the factory preset data. Press "EXIT" button to cancel and return the previous menu. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
When the OFF TIMER is set, the SCHEDULE settings will be disabled. OSD H POSITION Adjusts the horizontal position of the OSD menu. OSD V POSITION Adjusts the vertical position of the OSD menu. MONITOR INFORMATION Indicates the model and serial number of your monitor. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
OFF: Disable the Film mode function. This mode is better suited for Broadcasting or VCR source. IR CONTROL Selects the operation mode of the wireless remote controller when multiple CD4620 monitors are connected via RS-232C. The item in this menu will become effective by pressing “SET” button on the selected item.
Page 34
This OSD can't remove except EXIT. (see “NOTE 2” on page 30 for further information) MONITOR ID ID numbers for remote control are assigned to CD4620 monitors that are multi-connected via RS-232C. ID numbers 1 to 26 are selectable. DDC/CI Use to turn ON or OFF the DDC/CI communication function.
ID numbers 1 to 26 are selectable. It is recommended to assign sequential ID numbers from 1 and up. 2. The remote control mode of the first CD4620 monitor is set to PRIMARY and those of the other monitors are set to SECONDARY.
Functions that can be controlled by a personal computer are: Connection LCD Monitor + PC NOTE: We have two kinds of RS-232 protocol including serious connection and no serious connection that can use by user. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
3. Remove screws with a screwdriver and place them in a safe place for reuse. Screws Longer portion comes to the front. Stands * Stand is not supply. (Stand sold as an option accessory) ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Allows you to use the entire screen area in most resolutions, significantly expanding image size. Wall Mounting Interface: Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. VIEWSONIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.
NOTE: As with all personal display devices, VIEWSONIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
C-UL/TUV-GS/FCC-B/DOC-B/C-Tick/CE/BSMI/GOST/PSB Power Management VESA DPM Plug & Play VESA DDC2B, DDC/CI User's Manual, Power Cord, Video Signal Cable, Remote Controller, Accessories AAA Battery x 2, Note: Technical specifications are subject to change without notice. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico T= 0800-53311 Latin America (Peru) www.viewsonic.com/la/...
How long the warranty is effective: ViewSonic LCD displays are warranted for 1 years for all parts including the light source and 1 years for all labor from the date of the first consumer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Page 44
Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon incon- venience, loss of use of the product, loss of time, loss of profits, loss of business opportu- nity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
& accessories. How long the warranty is effective: ViewSonic LCD displays are warranted for 1 years for all parts including the light source and 1 years for all labor from the date of the first consumer purchase.
Page 46
381 Brea Canyon Road, Walnut, CA. 91789 USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico Fax: 1-800-685-7276 E-Mail: http://www.viewsonic.com LCD_LW03 Rev. 1a 06-11-07 4.3: ViewSonic Mexico Limited Warranty Page 2 of 2 ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Introduction This document describes the hardware interface spec and software protocols of RS232 interface communication between Viewsonic Commercial Display and PC or other control unit with RS232 protocol. Viewsonic CD4620 and CD4220 contain with 2 set of protocol command Protocol 1, with ID...
Reply (Hex Format) Name Length Command Type 0x34 0x30 0x2B 0x0D 0x32 Example2: Set Brightness as 176 for TV-02 and this command is NOT valid Send (Hex Format) Name Length Command Type Command Value1 Value2 Value3 ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Page 50
Command Value1 Value2 Value3 0x38 0x39 0x73 0x24 0x30 0x37 0x36 0x0D 0x39 No Reply. CD4620/CD4220 set-function table Set Function Length Command Command Value Range Comments (Three ASCII bytes) Type Code (ASCII) Code (Hex) Power 000: STBY Controlled power status: ON or Standby...
Page 51
000: Disable Disable: Key Pad have no effect on HDTV. 001: Enable Enabled: Key Pad control the HDTV. This is the power up default on the HDTV. Factory reset Rests HDTV to factory setting ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
LCD Monitor will send “-” (02Dh) and “CR” bytes to PC if the command is not valid. Value Range: Three bytes ASCII value range Command Code: Function command code in ASCII CD4620/CD4220 set command table Set Function Length Command Command...
Page 55
000: Disable Disable: Key Pad have no effect on HDTV. 001: Enable Enabled: Key Pad control the HDTV. This is the power up default on the HDTV. Factory reset Rests HDTV to factory setting ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Get-ACK from PC to LCD (ASCII) Name Length Command Value1 Value2 Value3 Byte Count Bytes order LCD Monitor will send “+” (02Bh); “CR” bytes to PC after receiving the command indicating that the communication link is OK ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...
Page 57
000: STBY Gets the status of the HDTV power. 001: ON HDTV response: 000 = HDTV is in standby 001 = HDTV is ON Get-ACK This command is used to test the communication link. ViewSonic CD4620 Downloaded From TV-Manual.com Manuals...