Makita 6908D Technical Information page 3

C
aution
Please refer to the instruction manual for Model 6908DW.
R
epair
(1) How to dismount the housing R and L
Dismount the housing after taking off the hammer case.
(2) How to dismount the bit holder
Bit holder is constructed as illustrated right.
Take off the ring spring, and then bit holder
can be dismounted.
After dismounting of bit holder, the anvil
can be dismounted from the hammer case.
(3) How to mount the flat washer
The flat washer has to be mounted between
hammer case and anvil.
In this case, the chamfered part on the flat washer
has to face the anvil as illustrated right.
(4) How to dismount the hammer
Adjust the open part for steel ball on hammer
with the top of groove on spindle pressing
the hammer with arbor press.
Then the steel ball can be taken off
in order to dismount the hammer.
Compression spring
Ring spring Sleeve
Flat washer
Chamfered part
Swelling part
Steel ball
insert entrance
Steel ball
Groove
Anvil
Flat washer
Anvil
Hammer case
Spindle
Cum groove top
Hammer
Gear