Table 1 Cisco Wan Manager Release 10.5 Documentation; Related Documentation - Cisco BPX 8620 Installation And Configuration Manual

Cisco WAN Switching Product Name Change
Cisco WAN Switching Product Name Change
The Cisco WAN Switching products were once known by older names.
Old Name
Any switch in the BPX switch family (Cisco
BPX® 8620 broadband switch and Cisco
BPX® 8650 broadband switch)
The BPX Service Node switch
The BPX switch as a Label Switch Controller The Cisco BPX® 8650 broadband switch
The AXIS shelf
Any switch in the IGX switch family (IGX 8,
IGX 16, and IGX 32 wide-area switches)
The IGX 8 switch
The IGX 16 switch
Cisco StrataView Plus®

Related Documentation

The following Cisco publications contain additional information related to the operation of this product
and associated equipment in a Cisco WAN switching network.
Cisco WAN Manager Release 10.5 Documentation
The product documentation for the Cisco WAN Manager (CWM) network management system for
Release 10.5 is listed in Table 1.
Table 1 Cisco WAN Manager Release 10.5 Documentation
Title
Cisco WAN Manager Installation Guide for Solaris,
Release 10.5
DOC-7812948=
Cisco WAN Manager User's Guide, Release 10.5
DOC-7812945=
Cisco WAN Manager SNMP Service Agent,
Release 10.5
DOC-7812947=
Cisco WAN Manager Database Interface Guide,
Release 10.5
DOC-7812944=
Cisco BPX 8600 Series Installation and Configuration
xxxvi
New Name
A Cisco BPX® 8600 series broadband switch
The Cisco BPX® 8620 broadband switch
The Cisco MGX™ 8220 edge concentrator
The Cisco IGX™ 8400 series multiband switch
The Cisco IGX™ 8410 multiband switch
The Cisco IGX™ 8430 multiband switch.
Cisco WAN Manager® (CWM)
Description
Provides procedures for installing Release 10 of the CWM network
management system and Release 5.3 of CiscoView.
Describes how to use the CWM Release 10 software which consists of
user applications and tools for network management, connection
management, network configuration, statistics collection, and security
management.
Provides information about the CWM Simple Network Management
Protocol Service Agent, an optional adjunct to CWM used for
managing Cisco WAN switches using SNMP.
Provides information about accessing the CWM Informix OnLine
database that is used to store information about the network elements.
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
About This Guide