Advertisement
CARE, CLEANING & STORAGE
MOTOR BOdy
To remove any food residue wipe the motor
body and cord with a damp cloth only. Do
not use abrasive cleaners or steel wool.
Never immerse the motor body in water or
any other liquid.
BLENdING LEG
Before cleaning, turn the power off at the
power outlet and then remove the plug.
Remove the motor body from the blending
leg. The blending leg can be hand washed in
hot soapy water, rinsed and dried thoroughly
after each use. Alternatively, the blending
leg can also be washed in the dishwasher. Do
not use abrasive cleaners or steel wool.
QUICK WASH: Between each processing
task, with the motor body attached and
turned on at the power outlet, place the
blending leg and blade assembly only in to
a jug of water and press the trigger switch
to turn on for 5 seconds. This will remove
any food on the blade and blending leg
and allow you to continue onto the next
processing task.
BLENdING JUG
The blending jug can be hand washed in hot
soapy water, rinsed and dried thoroughly
after each use. Alternatively, the blending
jug can also be washed in the dishwasher.
Do not use abrasive cleaners or steel wool.
STORAGE
Before storage, turn the power off at
the power outlet and then remove the
plug. Ensure the appliance is clean and
completely dry.
13
Advertisement
