Table of Contents
Advertisement
INSTALLING THE SD MEMORY CARD
A Micro SD Memory Card must be installed in the camera for normal use.
Make sure the card is genuine high-speed Micro SD Memory card, CLASS 4 or above.
Use a genuine TF Card with the capacity as 4GB or above (up to 32 GB).
IMPORTANT: The camera will not capture photos, videos or audio without a Micro SD card.
Memory Cards are not included and must be purchased separately.
TO INSTALL THE MICRO SD MEMORY CARD:
1)
Power off the camera.
2)
Flip open the Micro SD Card Slot cover.
3)
Insert the SD Memory Card until a click sound is heard.
4)
Make sure the SD card is properly inserted.
After the camera is powered on, an SD icon appears on the LCD display
If you do not see the SD icon on the display, please check if the card was inserted properly.
TO REMOVE THE MICRO SD CARD:
1)
Power off the camera.
2)
Push the memory card inward until a slight clicking sound is heard and the memory card
pops out of the slot.
NOTE:
When using a new TF card, the card must be formatted. Insert the new TF card, power on the
camera, select 'Format...' from the Camera Setup menu and follow the prompts to format the
card.
5
.
Advertisement
Table of Contents
