Opening The Display; Closing The Display - Dell XPS M2010 Service Manual

Back to Contents Page
Display
Dell™ XPS™ M2010 Service Manual

Opening the Display

Closing the Display

Adjusting the Display Panel
Removing the LCD Panel
Replacing the LCD Panel
CAUTION: Before performing the following procedures, follow the safety instructions in your Product
Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal
surface. If you leave the area, ground yourself again when you return to the computer.
NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the
computer.
Opening the Display
1. Open the computer by sliding the two display latch releases toward the front of the computer to release the four
display latches.
Two latches hold the display panel to the computer base and two latches hold the display panel to the keyboard.
1 display latch releases (2)
2. Raise the display panel to open the computer. As you raise the display panel, the four latches will retract into the
display panel.
NOTE: If the system battery is drained or removed and there is no power source, the latches will not retract.
Closing the Display
1. Before closing the display panel, ensure that the keyboard is firmly attached to the computer base.
2. Slowly lower the display panel toward the computer base. As you lower the display panel, the four display latches will
emerge from the display panel to secure the display to the computer base and keyboard.
2 display latches (4)