Technical Data - AEG S74010KDX0 User Manual

16 www.aeg.com
• Refit and screw both lower hinges.
• Refit the plinth (8).
•
• Remove the handle. Unscrew the top
handle bracket from the handle rod
(1). Unscrew the bottom handle brack-
et from the door (2)
• Unscrew the top handle bracket from
the door (3).
• Re-screw the handle bracket on the
door (4). Turn the handle bracket with
the handle and screw them to the
door (5) and the fitted handle bracket
(6)
• Re-insert the door on the lower hinge
pivot .
• Re-insert the door on the upper hinge
pivot slightly tilting the door.

10. TECHNICAL DATA

Dimension
Voltage
Frequency
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
5
4
Height
Width
Depth
• Screw the lower hinges.
• Stand the appliance upright.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact
the nearest After Sales Service Force.
The After Sales Service specialist will car-
ry out the reversibility of the doors at
your cost.
1
2
4
1850 mm
595 mm
658 mm
230-240 V
50 Hz
3
5
6