Yamaha MT09 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
Average fuel consumption display
1
3
1. Average fuel consumption display
The average fuel consumption display
can be set to either "AVE_ _._ km/L",
"AVE_ _._ L/100 km" or "AVE_ _._
MPG" (for the UK only).
This display shows the average fuel
consumption since it was last reset.
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
 "AVE_ _._ MPG" (for the UK only):
The average distance that can be
traveled on 1.0 Imp.gal of fuel is
shown.
To switch between the average fuel
consumption displays, push the "SE-
LECT" button for one second when
one of the displays is shown.
To reset the average fuel consumption
display, select it by pushing the "SE-
LECT" button, and then push the "RE-
SET" button for at least one second.
TIP
After resetting an average fuel con-
sumption display, "_ _._" is shown for
that display until the vehicle has trav-
eled 1 km (0.6 mi).
Coolant temperature display
1
1. Coolant temperature display
3-11
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message "HI" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 6-44.)
TIP
 When the coolant temperature is
below 40 °C, "LO" will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Air intake temperature display
1
1. Air intake temperature display