Yamaha MT09 Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
Speedometer
1
3
1. Speedometer
The speedometer shows the vehicle's
traveling speed.
Tachometer
1
1. Tachometer
2. Tachometer red zone
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer will sweep across the r/min
range and then return to zero r/min in
order to test the electrical circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11250 r/min and above
Clock
1
2
1. Clock
The clock displays when the key is
turned to "ON". In addition, the clock
can be displayed for 10 seconds by
3-7
pushing the "SELECT" button when
the main switch is in the "OFF",
"LOCK" or " " position.
To set the clock
1. Turn the key to "ON".
2. Push the "SELECT" button and
"RESET" button together for at
ECA10032
least two seconds.
3. When the hour digits start flash-
ing, push the "RESET" button to
set the hours.
4. Push the "SELECT" button, and
the minute digits will start flashing.
5. Push the "RESET" button to set
the minutes.
6. Push the "SELECT" button and
then release it to start the clock.