European determined according to EN60745: Directives, on Waste Electric and Electronic Equipment and Batteries and Model BJN160 Accumulators and Waste Batteries and Work mode : cutting sheet metal Accumulators and their implementation Vibration emission (a ) : 7.0 m/s in accordance with national laws, Uncertainty (K) : 1.5 m/s...
EC Declaration of Conformity modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power We Makita Corporation as the responsible manufacturer tools. Unmodified plugs and matching outlets will declare that the following Makita machine(s): reduce risk of electric shock.
Page 4
15. Dress properly. Do not wear loose clothing or 26. When battery pack is not in use, keep it away jewellery. Keep your hair, clothing, and gloves from other metal objects, like paper clips, away from moving parts. Loose clothes, coins, keys, nails, screws or other small metal jewellery or long hair can be caught in moving objects, that can make a connection from one...
ENC007-8 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: Always be sure that the tool is switched off and the • FOR BATTERY CARTRIDGE battery cartridge is removed before adjusting or Before using battery cartridge, read all checking function on the tool. instructions and cautionary markings on (1) Installing or removing battery cartridge battery charger, (2) battery, and (3) product...
Page 6
In this situation, turn the tool off and stop the Permissible cutting thickness application that caused the tool to become overloaded. Then turn the tool on to restart. 1. Gauge for If the tool does not start, the battery is cutting stainless: 1.2 mm (3/64") overheated.
Indication lamp with multi function 1. Punch 2. Punch holder 1. Indicating lamp 3. Screw 4. Hex wrench 5. Loosen 6. Tighten 013274 To install the punch and die, insert the punch into the 013277 punch holder so that the notch in the punch faces Indication lamps are located in two positions.
Cutting method 1. From the side view 2. Cutting head should be at a right angle (90 ) to cutting surface. 004791 Always hold the tool body parallel to the grooves with 013278 the cutting head at a right angle (90°) to the cutting Hold the tool so that the cutting head is at a right angle surface as shown in the figure.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Punch • Hex wrench • Wrench 32 •...
Page 12
Makita Corporation Anjo, Aichi, Japan www.makita.com 885174A222...