Table Of Contents; Introduction - Toro 03180 Operator's Manual

Introduction

This product complies with all relevant European
directives, for details please see the separate product
specific Declaration of Conformity (DOC) sheet.
This reel-blade lawnmower is mounted to a ride-on
machine and is intended to be used by professional, hired
operators in commercial applications. It is primarily
designed for cutting grass on well-maintained lawns in
parks, golf courses, sports fields, and on commercial
grounds. It is not designed for cutting brush, mowing
grass and other growth alongside highways, or for
agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Location of the model and serial numbers
© 2011-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Safety and Instructional Decals ............................. 3
Setup............................................................................ 4
1 Inspection ......................................................... 4
2 Cutting Unit Kickstand ...................................... 4
3 Adjusting the Rear Shield ................................... 5
4 Mount the Counter Weights ............................... 5
5 Installing the Tipper Roller Kit
(Optional) ........................................................ 6
6 Installing the Fixed Plate Kit (Optional) .............. 6
Product Overview ........................................................ 8
Specifications ....................................................... 8
Cutting Unit Accessories and Kits (see parts
catalog for part numbers).................................. 8
Operation..................................................................... 9
Adjustments......................................................... 9
Height of Cut Chart Terms ................................. 10
Height of Cut Chart............................................ 11
Servicing Bedknife ............................................. 13
Maintenance............................................................... 15
Lubrication......................................................... 15
Adjusting the Reel Bearings ................................ 15
Servicing the Bedbar........................................... 16
Servicing the Roller ............................................ 17
2
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved