Sanyo PLC-WXU30 Owner's Manual page 158

Chapter 7 Controlling the projector
Notes on timer setting
Up to 10 timer events can be registered. Timer events always operate according to the next valid event
depending on the projector's power status. In the example below, event 3 turns on the projector so
next event 4 (also turning on projector) will not be effective because the projector is already turned on.
Similarly, when the projector is turned off by event 5, event 6 OFF will not be effective in turning it off
again. But these secondary events (event 4 and event 6) will become effective if a person turns off the
projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6).
Projector Power
Event 1
Event 2
Event 3
Event 4
Event 5
Event 6
When the timer events are set at the same time, the last event set will override the previous events. For
example, if there is an event like "ON at 8:00 everyday" and then new event is set like "OFF at 8:00 every-
day", only the last setting event is effective.
When the timer event ON occurs during cooling down period, this is invalid event because the projector
cannot be turned on during that cooling down period.
76
ON
OFF OFF
ON
OFF
ON
Time
Invalid event Invalid event
ON
OFF
ON
OFF
OFF