Transfer With Camp-On; Call Waiting - Samsung iDCS500 User Manual

Samsung iDCS500
(When you are transferring a call to a keyset set for Voice Announce or Auto
Answer, the transferred call will always ring.)
Note:
•
After the called party answers, you may toggle between the calling and called
parties by pressing the TRSF key.
•
If you receive No More Calls tone, the extension has no key available to re-
ceive another call or is in Do Not Disturb mode. Press the TRSF key to return
to the caller.

TRANSFER WITH CAMP-ON

When you are transferring a call to another extension and you receive a busy
signal, you may camp the call on to the extension. Simply hang up when you
hear the busy signal. The called party will be alerted that a call is waiting for
them.
Note: If you receive No More Calls tone, the extension has no key available to re-
ceive another call or is in Do Not Disturb mode. Press the TRSF key to return to
the outside caller.
TRANSFER TO VOICE MAIL
This feature is used to send a call directly to a voice mailbox. Your keyset
must have a programmed VT key. To transfer a call directly to a voice mail-
box:
1. While on a call, press the VT key and dial the mailbox number.
2. Hang up.

CALL WAITING

If an outside call has been camped on to your extension or another extension
has camped on to you, your keyset will ring and the call that is waiting for
you will flash green.
E :
ITHER
•
Put your current call on hold. (If your extension has the Automatic
Hold feature set, simply press the flashing key to put the call on hold
and answer the waiting call. Otherwise, press the HOLD key to hold and
then press the flashing key to answer the waiting call.)
DCS (Euro) Keyset User Guide
– 19 –