Mounting The Camera To A Tripod - Sony HSC300RF Operation Manual

To attach a microphone using a CAC-12
When attaching a long-type microphone, such as an ECM-
674/678, use an optional CAC-12 Microphone Holder.
1
1 Remove the front screw-hole cover on the top then
2 fix the CAC-12 in place with the two screws (+B4 ×
8) supplied with the CAC-12.
CAC-12
1
2
Loosen the screw to open the CAC-12 and attach the
microphone.
If the microphone diameter is small, attach the adapter A
(supplied with the CAC-12 or the microphone) to the
microphone.
A

Mounting the Camera to a Tripod

Mount the camera to a tripod, using an optional VCT-14 Tripod
Adapter.
Notes
• Select an appropriate hole from among those at the bottom
2
• Check that the size of the selected hole matches that of the
1
2
3
To remove the camera from the tripod adapter
Hold down the red button and pull the lever in the direction of
the arrow.
of the tripod adapter considering the balance of the weight
of the camera and the tripod adapter. If an inappropriate
hole is selected, the camera may fall over.
screw of the tripod. If they do not match, the tripod adapter
cannot be attached to the tripod securely.
2
1
1
2
1 Attach the tripod adapter to the tripod and 2
secure it with the screw.
Place the camera on the tripod adapter and slide
forward it along the groove of the tripod adapter until
it clicks.
Move the camera backward and forward and check
that the camera does not come off.
Red button
Tripod adapter
Platform
Lever
15
Connection and Setup