Constructing A New Wireless Network Environment For Your Computer - Dell 2155cn User Manual

5 Select the network type from Infrastructure and Ad-Hoc.
6 Select the encryption type from No Security, WEP, WPA-PSK-AES, and
WPA-PSK-TKIP, and then set each item for the encryption type selected.
NOTE:
7 Click the Apply New Settings button to apply the settings.
8 When the operation is successful and the printer is rebooted, wireless LAN
connection setting is completed.

Constructing a New Wireless Network Environment for Your Computer

When you setup your wireless connection first time, the following settings are
required on your computer.
For DHCP network:
1 Setting up your computer for wireless connectivity:
NOTE:
settings using this tool. Or you can change the wireless settings using the tool
provided with the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a
Right-click Wireless Network Connection and select Properties.
b
Select the Wireless Networks tab.
c
Ensure the check box for Use Windows to configure my wireless
d
network settings is checked.
NOTE:
e and step g so that you can restore them later.
Click the Advanced button.
e
Select Computer to Computer (ad hoc) networks only and close the
f
Advanced dialog box.
Click the Add button to display Wireless network properties.
g
Under the Association tab, enter the following information and click
h
OK.
Network name (SSID): dell_device
Downloaded from ManualsPrinter.com Manuals
For details on each item, see "Dell Printer Configuration Web Tool."
If your computer provides a wireless adapter tool, change the wireless
Be sure to write down the current wireless computer settings in step
Installing Optional Accessories
79