Dell 2155cn User Manual page 79

5 Press
(Set) button.
6 Press
7 Ensure that Push Button Control is highlighted, and then press the
(Set) button.
8 Press
button.
9 Ensure that the message Please wait Wireless Setting is
displayed, and start the WPS-PBC on the wireless LAN access point
(Registrar), within two minutes of the step 7 operation.
NOTE:
manual supplied with the wireless LAN access point.
10 When the WPS operation is successful and the printer is rebooted, wireless
LAN connection setting is completed.
Operator Panel
1 Press the
2 Press
(Set) button.
3 Press
(Set) button.
4 Press
button.
5 Press
(Set) button.
6 Ensure that Manual Setup is highlighted, and then press the
button.
7 Enter the SSID, and then press the
8 Select the network mode from Infrastructure and Ad-hoc
depending on your environment.
When you select Infrastructure, proceed to step 9.
When you select Ad-hoc, proceed to step 10.
9 Select the encryption type from No Security, WEP (64Bit), and WEP
(128Bit).
Downloaded from ManualsPrinter.com Manuals
button until Wireless Setup is highlighted, and then press the
button until WPS is highlighted, and then press the
button until Start is highlighted, and then press the
For WPS operation on the wireless LAN access point, refer to the
(Menu) button.
button until System Setup is highlighted, and then press the
button until Admin Menu is highlighted, and then press the
button until Network is highlighted, and then press the
button until Wireless Setup is highlighted, and then press the
(Set) button.
Installing Optional Accessories
(Set) button.
(Set)
(Set)
(Set)
77