Hardware Overview
LEDs
5 GHz - When lit, the access point is operating at 5GHz.
This light will blink when there is wireless traffic.
2.4 GHz - When lit, the access point is operating at 2.4GHz. This light
will blink when there is wireless traffic.
LAN1/LAN2 - Solid light when the Ethernet port is connected to a
working port, such as a router or switch. The light will blink when there
is traffic through LAN port.
POWER - The light will blink during boot up. Once solid, the access
point is ready.
D-Link DAP-2695 Quick Install Guide
3