Tray Use In Copy Mode; Tray Use In Print Mode - Brother dcp-9045cdn User Manual

Tray use in copy mode

You can change the priority tray that the
machine will use for printing copies.
When you choose Tray#1 Only, MP Only
1
or Tray#2 Only , the machine loads the
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
To change the tray setting follow the
instructions below:
a
Press Menu, 1, 6, 1.
16.Tray Use
1.Copy
a
MP>T1
b
T1>MP
Select ab or OK
b
Press a or b to choose Tray#1 Only,
1
, MP Only,
Tray#2 Only
1
or T1>T2>MP
MP>T1>T2
Press OK.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
c
Press Stop/Exit.
Note
• The ADF can detect the document size .
When loading the documents from the
ADF and MP>T1>T2 or T1>T2>MP is
selected, the machine looks for the tray
with the most suitable paper size and pulls
paper from that tray. If no tray has suitable
paper, the machine pulls paper from the
higher priority tray.
• When using the scanner glass, your
document is always copied from the
higher priority tray even if more suitable
paper is in another paper tray.

Tray use in print mode

3
You can change the default tray the machine
will use for printing from your computer.
a
b
c
1
.
• The setting in the printer driver will take
• If the control panel is set to
1
Press Menu, 1, 6, 2.
16.Tray Use
2.Print
a
MP>T1
b
T1>MP
Select ab or OK
Press a or b to choose Tray#1 Only,
1
, MP Only,
Tray#2 Only
1
or T1>T2>MP
MP>T1>T2
Press OK.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
Press Stop/Exit.
Note
priority over the setting made on the
control panel.
Tray#1 Only, MP Only or
1
and you choose
Tray#2 Only
Auto Select in the printer driver, the
machine loads the paper from that tray.
Tray#2 Only appears only if the optional tray is
installed.
General setup
3
3
1
.
21