Replacing The Waste Toner Box - Brother dcp-9045cdn User Manual

k
Press Menu, 6, 6.
Only the parts counters that need to be
reset appear in the menu.
66.Reset Menu
Belt Unit
Select ab or OK
l
Press a or b to choose Belt Unit.
Press OK.
m
Press 1 to reset the belt unit counter.
n
Press Stop/Exit.

Replacing the waste toner box

Order Number: WT-100CL
Change Parts Waste Toner Box message
After you have printed approximately 20,000
images at 5% coverage for CMYK each, you
must change the waste toner box. The actual
number of printed pages will vary depending
on the print jobs and paper you use.
Change Parts
Waste Toner Box
Waste Toner Box Full message
When the waste toner box is full, the following
message appears on the LCD and the
machine will stop printing. When you see this
message, you must replace the toner box:
Waste Toner Full
WARNING
DO NOT reuse the waste toner box.
132
Replacing the waste toner box
WARNING
DO NOT put the waste toner box into a fire.
It could explode.
Be careful not to spill the toner. DO NOT
inhale or allow it to get into your eyes.
CAUTION
Handle the waste toner box carefully. If
toner scatters on your hands or clothes,
C
wipe or wash it off with cold water at once.
a
Press the front cover release button and
C
then open the front cover.
C
C