Toro 22289 Operator's Manual page 8

4. Stand behind the machine in the operating position to
determine the handle height that is most comfortable
for you (Figure 4).
Figure 4
1. Handle
2. Handle bracket (2)
3. Highest handle height
5. Secure the handle onto the handle brackets at your
desired handle height with 2 carriage bolts (5/16 x
1-1/2 inches) and 2 flange nuts (5/16 inch) as shown
in Figure 5.
Important: Ensure that the bolt heads are on
the inside of the handle and the nuts are on the
outside of the handle.
Figure 5
1. Carriage bolt—5/16 x
1-1/2 inches (2)
2. Handle bracket (2)
4. Medium handle height
5. Lowest handle height
3. Flange nut—5/16 inch (2)
6. Position the cable guard onto the handle with the
cable(s) inside the guard, and secure the guard to the
handle with the 2 carriage bolts and the 2 locknuts that
you previously removed
Important: Ensure that you do not pinch the
cable(s) to the handle with when you install the
cable guards onto the handle.
8
(Figure 3).