13 - 72 WiNG 5 Access Point System Reference Guide
13.3.11.2 Viewing Interface Statistics Graph
Interfaces
The
Network Graph
interface, then choose from up to three performance variables from within the
graph has Port Statistics as the Y-axis and the Polling Interval as the X-axis. Select different parameters on the Y-axis
and different polling intervals as needed.
13.3.12 PPPoE
Access Point Statistics
The PPPoE statistics screen displays stats derived from the AP's access to high-speed data and broadband networks.
PPPoE uses standard encryption, authentication, and compression methods as specified by the PPPoE protocol. PPPoE
enables access points to establish a point-to-point connection to an ISP over existing Ethernet interface.
To review a selected access point's PPPoE statistics:
1. Select the
2. Select
System
an access point for statistical observation.
3. Select
PPPoE.
tab displays interface statistics graphically. To view a detailed graph for an interface, select an
Figure 13-38 Access Point Interface - Network Graph tab
Statistics
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select
Parameters
drop down menu. The