■ Mitsubishi components or other designated ■ This Class B digital apparatus complies with components must be used for installation. Canadian ICES-003. Improper component may result in fire, electric ■...
Page 3
Third party Wi-Fi interface cannot connect to MELCloud. Mitsubishi Electric is not responsible for any (i) underperformance of a system or any product; (ii) system or product fault; or (iii) loss or damage to any system or product; which is caused by or arises from connection to and/or use of any third party Wi-Fi interface or any third party Wi-Fi service with Mitsubishi Electric equipment.
It activates WPS. 2 RESET switch It resets the system and ALL settings. 3 LED1 (Green) It shows the wireless communication state. 4 LED2 (Orange) It shows the PAC-WF010-E state. 5 LED3 (Green) It shows the local communication state. 3. Parts...
5. LED pattern :OFF :Blinking Description LED1 LED LED Power is ON or software downloaded (0.5-sec interval) (0.5-sec interval) (0.5-sec interval) ALL settings reset WPS activated (PBC) (0.5-sec interval) WPS activated (PIN) (0.2-sec interval) WPS enabled (5-sec) WPS failed (5 sec) Server and access point communication connected, and ecodan unit communication failed (once every 5 sec) (0.5-sec interval)
Page 6
EU regulations: • R & TTE Directive 1999/5/EC HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN AUTHORIZED REPRESENTATIVE IN EU: MITSUBISHI ELECTRIC EUROPE B.V. HARMAN HOUSE, 1 GEORGE STREET, UXBRIDGE, MIDDLESEX UB8 1QQ, U.K. BH79T730H01 Printed in Japan...