Programmed Play - AEG SR 4363 CD Instruction Manual

English
38
/ (9)
With you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The button can be used as follows:
Press once = This starts the current track again from
the beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the but-
ton is kept pressed down, the machine
starts to search through the tracks.
(6)
• The playback is stopped.
• For selecting a preset radio station during radio mode.
(5)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
• For setting the alarm time in standby mode (see the
chapter "Alarm function").
During playback:
Press once = the current track is repeated continu-
ously. The symbol
Press twice = the whole CD is played continuously.
The symbol
Press three times = RAN appears on the display. All tracks
will be played in random order.
Press four times = all functions are cancelled. The normal
play mode is resumed.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the button (6).
2. Press the button (5). "P01" (Storage space) and the
notification " " will appear in the display. Use the
buttons (9) to select the desired track and then press
the button again. The display changes to memory
slot P02.
3. Select the next track with the
the button again. Repeat the procedure until all the
desired tracks are selected.
NOTE:
When the memory capacity for programming tracks
has been reached, "FUL" will appear in the display.
4. Press the button (7). The playback starts. The
notification " " will appear additionally in the display.
5. Press once the
retaining the program.
6. To play the programme back again, press the
button.
is lit in the display.
is lit in the display.
/ buttons and press
button to stop the playback while
7. To delete the program, press the
notification " " will disappear.
The device stops automatically after all programmed titles
have been played. The programmed sequence will be stored
in the memory until you switch to another mode.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.
AUX IN socket
To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the AUX socket.
2. Repeatedly press the
/
shown in the display.
3. You will hear the sound playback from the external device
through the loudspeakers. Use the VOLUME control (4)
to adjust the volume. The CD buttons are not functional.
4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.
Alarm function
Setting the alarm time
1. Briefly press the
mode.
button twice. The
button (10), until "AU" is
button to activate the standby