8.2
Cleaning the Scanner Exterior
Clean the scanner exterior and the stacker with a cloth moistened with a small amount of Cleaner
F1 or any neutral detergent.
ATTENTION
•
During the cleaning, prevent water or moisture from getting inside the scanner.
•
It may take long before the cleaner vaporizes if a large quantity is used. When
cleaning the scanner parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
8.2 Cleaning the Scanner Exterior
Cloth
Cleaner F1 or
neutral detergent
Paint thinner
ScanSnap S510 Operator's Guide
8
237