Qos Settings - Panasonic KX-NT700 Operating Instructions Manual

RTP Port Number (Minimum)
Description
Determines the lowest port number used for RTP.
The communication protocol used is UDP.
•
Set this parameter to a value lesser than the setting for
"RTP Port Number (Maximum)".
RTP Port Number (Maximum)
Description
Determines the highest port number used for RTP.
The communication protocol used is UDP.
•
Set this parameter to a value greater than the setting
for "RTP Port Number (Minimum)".
DTMF Type
Description
Determines the type of DTMF signal sent during a call.

QoS Settings

VLAN ID
Description
Determines the VLAN ID.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
VLAN Priority
Description
Determines the VLAN priority.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Document Version 2011/06
Available Settings
51000–51998
(even values only)
Available Settings
51002–52000
(even values only)
Available Settings
In-band
Out-of-band
Available Settings
0001–4095
Available Settings
0–7
Operating Instructions
Programming the Unit
Default Setting
51000
Default Setting
52000
Default Setting
Out-of-band
Default Setting
4095
Default Setting
0
59