Specifications; Specific Safety Rules - Makita BTD132 Instruction Manual

ENGLISH
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Lamp
4-1. Light button
5-1. Reversing switch lever

SPECIFICATIONS

Capacities
-1
No load speed (min
Impacts per minute
Net weight (with battery cartridge)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-2:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-2:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.5 m/s
EC-DECLARATION OF CONFORMITY
Model; BTD132
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014
Explanation of general view
6-1. Changed in three steps
6-2. Hard
6-3. Medium
6-4. Soft
6-5. Hammering force button
7-1. LED indicator
9-1. Bit
Model
Machine screw
Standard bolt
High tensile bolt
Hammer mode (Hard)
) Hammer mode (Medium)
Hammer mode (Soft)
Hammer mode (Hard)
Hammer mode (Medium)
Hammer mode (Soft)
Overall length
Rated voltage
) : 92 dB(A)
pA
) : 103 dB(A)
WA
value (tri-axial vector
2
) : 12.0 m/s
h
2
in accordance with Council
ENE033-1
Directives, 2004/108/EC, 98/37/EC.
ENG102-1
000230
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
ENG205-1
8JD, ENGLAND
sum)

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to impact driver safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
ENH102-8
personal injury.
1. Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock
3
9-2. Sleeve
10-1. Bit
10-2. Sleeve
11-1. Groove
11-2. Hook
11-3. Screw
BTD132
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,400
0 - 1,800
0 - 1,100
0 - 3,200
0 - 2,600
0 - 1,100
With one-touch bit holder 139 mm
Without one-touch bit holder 140 mm
1.3 kg
D.C.14.4 V
CE2008
Tomoyasu Kato
Director
GEB012-2