AEG CTV 4889 Instruction Manual page 74

English
74
05-CTV 4889_GB.indd 74 05-CTV 4889_GB.indd 74
Setting the Channel
Select the „Start" command. The channel setting menu appears. Use the
cursor buttons (Fig. 3/28) to select the channel that you would like to
modify. In order to display the following or previous fi ve channels, press
the I or I button on the remote control.
• Favourite: Press the FAV button (Fig. 3/18) to include the currently
selected channel in the favourites list.
• Delete: Press the DEL button (Fig. 3/17) to jump over the currently
selected channel when switching over.
• Protected: Press the PROT button (Fig. 3/16) to protect the currently
selected channel. You will then be asked to enter the password. If you
now want to select the channel, you will be asked once more to enter
the password.
To leave the channel setting menu, select the „EXIT" command and con-
fi rm with the ENTER button (Fig. 3/7).
NOTE:
The „EXIT" command can only be selected if the fi rst fi ve channels
are displayed.
The password is identical to the one you entered in the menu „Pass-
word Setup Page/Password".
Sorting the Channels
1. Select the „Start" command. The channel sorting menu appears.
2. Use the cursor buttons (Fig. 3/28) to select the channel you would
like to move.
3. Press the ENTER button (Fig. 3/7) and use the cursor buttons to select
the new channel slot.
4. Press the ENTER button again.
In order to leave the channel sorting menu, select the „EXIT" command
and confi rm with the ENTER button (Fig. 3/7).
NOTE:
The „EXIT" command can only be selected if the fi rst fi ve channels are
displayed.
Reserved Channels
Start: The programmes that you have reserved are shown.
Notify time: Here you can set the desired reminder time for the reserved
programmes.
08.09.2008 9:02:41 Uhr 08.09.2008 9:02:41 Uhr