Installing Your Router; Hardware Installation - Draytek Vigor2925 Series Quick Start Manual

2 . I
2 . I
This section will guide you to install the router through hardware connection
and configure the router's settings through web browser.
2 . 1
2 . 1
Before starting to configure the router, you have to connect your devices
correctly.
1. Connect the cable Modem/DSL Modem/Media Converter to any WAN
2. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports
3. Connect one end of the power adapter to the router's power port on the
4. Power on the device by pressing down the power switch on the rear
5. The system starts to initiate. After completing the system test, the ACT
Downloaded from www.Manualslib.com
n s t a l l i n g Y o u
n s t a l l i n g Y o u
H a r d w a r e I n s t
H a r d w a r e I n s t
port of router with Ethernet cable (RJ-45).
of the router and the other end of the cable (RJ-45) into the Ethernet port
on your computer.
rear panel, and the other side into a wall outlet.
panel.
LED will light up and start blinking.
(For the detailed information of LED status, please refer to section 1.1.)
manuals search engine
r R o u t e r
r R o u t e r
a l l a t i o n
a l l a t i o n
7
Vigor2925 Series Quick Start Guide