Table of Contents
Advertisement
Instructions for Installation (cont'd)
Wiring (cont'd)
USE WITHOUT
POWER
CORD
(cont'd)
3. A standard 1/2"conduit opening has been made in the
grounded. A green ground screw has been provided on the
water heater junction box for the conduit connection,
water heater's junction box. Connect ground wire to this
location. For complete grounding details and all allowable
4. Use wire nuts and connect the power supply wiring to the
exceptions, refer to the latest edition of the National
wires inside the water heater's junction box.
Electrical Code.
5. The water heater must be electrically "grounded" by the
6. Replace the wiring junction cover using the screw
installer. The unit will not operate unless it is properly
provided.
WIRING DIAGRAM
ON/OFFSWITCH
@
z
HILIMITSWITCH
_ I_IESSURE SWrrCH
@
O_:IFF
ACAUTION
Label all wires prior to disconnection
when
servic-
ing controls.
Wiring
errors can cause improper
and
dangerous
operation. Verify proper operation after
serv cing.
17
Advertisement
Table of Contents
