Bosch PLL 5 Original Instructions Manual page 19

OBJ_BUCH-311-007.book Page 19 Tuesday, May 6, 2014 1:30 PM
4 Adhesive tape strip*
5 Belt clip
6 Spirit level for vertical alignment
7 Spirit level for horizontal alignment
8 Aluminium supporting surface
9 Exit opening for laser beam
10 Latch of battery lid
11 Battery lid
12 Supporting points
13 Laser warning label
14 Magnets
15 Serial number
16 On/Off switch
*Accessories shown or described are not part of the standard delivery scope of
the product. A complete overview of accessories can be found in our acces-
sories program.
Technical Data
Line laser
Article number
Working range to approx.*
Levelling Accuracy**
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
* when using the wall holder 1; under unfavourable conditions such as intense sun irra-
diation, the working range is smaller
** when the measuring tool is positioned correctly (see "Positioning the Measuring Tool
(see figure B)", page 21)
The measuring tool can be clearly identified with the serial number 15 on the type plate.
Bosch Power Tools
English | 19
PLL 5
3 603 K15 000
5 m
±1 mm/m
+5 °C...+40 °C
–20 °C...+70 °C
90 %
2
635 nm, <2 mW
9.33
1 609 92A 0JK | (6.5.14)