Specifications; Specific Safety Rules - Makita JR3030 Instruction Manual

ENGLISH
1 Released position
2 Fixed position
3 Blade clamp sleeve
4 Blade

SPECIFICATIONS

Model
Length of stroke ........................................................................... 28 mm
Strokes per minute ...................................................................... 0 – 2,600
Cutting capacities
Pipe .......................................................................................... 90 mm
Wood ........................................................................................ 90 mm
Overall length .............................................................................. 438 mm
Net weight ................................................................................... 3.5 kg
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for sawing wood, plastic, metal and
building materials with a strong impact. It is suitable for
straight and curved cutting.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to recipro saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious per-
sonal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
2. Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
3. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the work-
piece before cutting so that the blade will not
strike the floor, workbench, etc.
7. Hold the tool firmly.
4
Explanation of general view
5 Lever
6 Shoe
7 Switch trigger
8 Lock button/Lock-off button
8.
9.
10. Do not leave the tool running. Operate the tool
11. Always switch off and wait for the blade to come
12. Do not touch the blade or the workpiece immedi-
13. Do not operate the tool at no-load unnecessarily.
14. Always use the correct dust mask/respirator for
15. Some material contains chemicals which may be
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
GEB008-2
this instruction manual may cause serious personal
injury.
9 Limit mark
10 Screwdriver
11 Brush holder cap
JR3030
Make sure the blade is not contacting the work-
piece before the switch is turned on.
Keep hands away from moving parts.
only when hand-held.
to a complete stop before removing the blade
from the workpiece.
ately after operation; they may be extremely hot
and could burn your skin.
the material and application you are working
with.
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
JR3030T
28 mm
0 – 2,600
90 mm
90 mm
460 mm
3.5 kg