Craftsman 919.672191 Owner's Manual page 12

For low pressure operation, extend the
nozzle of the multi-adjustable spray
wand as shown.
washer is capable of causing damage
to surfaces such as wood, glass,
automobile paint, auto striping and
trim, and delicate objects such as
flowers and shrubs. Before spraying,
check the item to be cleaned to
assure yourself that it is strong
enough to resist damage from the
force of the spray.
HOW TO USE THE DUAL TANK
CLEANING SYSTEM
NOTE: Use only soaps and cleaning
solutions designed for pressure
washer use. Do not use bleach.
To apply cleaning solutions:
1. Make sure cleaning solution tanks
are assembled and all hoses are
connected.
2. Turn control valve knob arrow to
the down (off) position as shown.
Control Valve Knob
A04546
low
pressure
The powerful spray
from your pressure
3. Fill cleaning solution tanks with
desired cleaning solution. Each
tank holds approximately 1.25
gallon. NOTE: The cleaning
solution/water ratio is 7:1, for
every 7 gallons of water pumped,
1 gallon of cleaning solution will
be used.
gasoline or other flammable solvent.
4. Turn control valve knob toward
tank with desired cleaning
solution.
Tank to
be used
5. Set multi-adjustable nozzle to low
pressure setting. See How To Use
Spray Wand paragraph in this
section.
6. After use of cleaning solution the
chemical injector MUST be rinsed,
follow the instructions in the
Shutting Down paragraph after
each use.
NOTE: Cleaning solutions will not
siphon when spray wand is in the high
pressure setting.
DUAL TANK CLEANING
SOLUTION TIPS
1. Each tank may be filled with
different cleaning solutions
depending on the task to be
performed. Example: deck and
driveway. Fill one tank with deck
cleaning solution and the other
with driveway cleaning solution.
Clean the deck with the deck
cleaning solution and then simply
turn the control knob toward the
driveway cleaning solution and
clean the driveway.
12- ENG
Never fill cleaning
solution tanks with