Pressure Control - Craftsman 320.39592 Operator's Manual

VARIABLE=SPEED
DiAL (Fig. 4}
The variable-speed dial allows
you to match the correct speed
to the sandpaper you are using
and the particular surfaces you
are sanding for either fast material
removal or a fine, smooth finish.
Rotate the dial from 1 to 6, with 1
being the lowest speed and 6 the
highest speed.
Fig. 4
Live-tool
indicator
Variable-
speed dial
THE LIVE=TOOL INDICATOR (Fig. 4}
When the tool is plugged into an electrical supply, the live-tool indicator
will shine green to remind you that the tool is plugged in. When the tool is
unplugged, the live-tool indicator will turn off.
PRESSURE CONTROL (Fig. 5)
The pressure-control indicator
F
lights to let you know if you are
applying the proper amount of
pressure during operation.
If only the green indicator light Pressure
illuminates, it indicates that you control
are applying the correct amount
of pressure, indicator
If the yellow and the green lights
both illuminate, they indicate that
you are applying a little more
pressure than needed.
If the red, yellow and green indicator lights all illuminate, this indicates that you are
applying too much pressure and you need to lessen the pressure as soon as possible.
,_ CAUTION: To prevent possible personal injury or tool or workpiece damage,
always be sure that the pressure control illuminates only green during tool operation.
13