Advertisement
Quick Links
Advertisement
Related Manuals for Craftsman 351.226061
Summary of Contents for Craftsman 351.226061
- Page 1 CRRFTSMRN o Operator's Manual 6 x 48" Oscillating Belt 12" Disc SANDER Model No. 351.226061 CAUTION: Read and follow all Safety Rules and Operating Instructions before First Use of this Product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 17985.00 Draft (01/18/02)
- Page 2 Craftsman sander fails due to a defect in material or work- manship, Sears will repair it free of charge. Warranty service • Check for damaged parts. Check for alignment of moving...
- Page 3 ATTACH FOOT RESTS Refer to Figure 12. Required parts and hardware: Refer to Figure 1. • Four foot rests with bolts Check for shipping damage. If damage has occurred, a claim • Eight 5/1o" flat washers must be filled with carrier. Check for completeness. •...
-
Page 4: Power Source
• Loosen and remove hex head bolt and flat washer from the NOTE: Though the motor works at 115/230-volt AC, sander disc table. must be operated at 115 volts only. • Replace hex head bolt with the handle provided. Secure Horsepower (Maximum Developed) .... -
Page 5: Extension Cords
3-pole receptacles which accept the tool plug. Craftsman 6" Oscillating Belt and 12" Disc Sander with cabi- net is constructed of rugged cast iron and heavy gauge steel • If the extension cord is worn, cut, or damaged in any way, providing stability and vibration-free operation. - Page 6 The two dust collection chutes accept the standard 4" dust • Replace abrasives when they become loaded (glazed) or collection hose for quick removal of dust. The adjustable miter frayed. gauge can be used on both the belt and disc tables for guid- •...
-
Page 7: Belt Tracking
HORIZONTAL BELT SANDING BELT TRACKING Refer to Figures 9 and 11. Refer to Figures 10 and 11. • Adjust the belt housing to full horizontal position as Belt (Key No. 25) should oscillate around center on drive and described in the above section, "Adjusting Belt Housing". idler drums (Key Nos. -
Page 8: Keep Tool In Repair
• Use the scale on disc table trunnions to set table at the • Loosen and remove knob (Figure 12, Key No. 7) from cabi- desired angle. net door assembly (Figure 12, Key No. 8). • Secure disc table position by tightening the two handles. •... - Page 9 SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION Motor will not start 1, Low voltage 1. Check power line for proper voltage 2. Open circuit in motor or loose 2. inspect all lead connections on motor for loose or connections open connection 3. Thermal overload protector activated 2, Push thermal overload button to reset Motor will not start;...
- Page 10 Model 351.226061 Figure 11 - Replacement Parts Illustration for Sander 39 40 44 50 16., -_...
- Page 11 PART NO. DESCRIPTION PART NO. DESCRIPTION QTY. 02225.00 Aluminum Disc 03062,00 Belt Cover STD503103 Y,s-18x 3/e"Set Screw* 03063.00 02226.01 Disc Cover Plate 02303.00 Knob 03333.00 #10-24 x %" Socket Head Bolt 17960.00 Belt Tension Handle 02227.00 12" Abrasive Disc 03065.00 Knob STD304340 A32 V-Belt*...
- Page 12 Model 351.226061 Figure 12 - Replacement Parts Illustration for Cabinet...
- Page 13 PART NO. DESCRIPTION QTY. 3076.01 Cabinet STD541031 "A6"-18 Hex Nut* STD551031 5A_" F iat Washer* 8879.00 Foot Rest STD523110 5/,,-18 x 1" Hex Head Bolt* 1413.00 Strain Relief 3314.00 Knob 3077.01 Cabinet Door Assembly STD541431 5/,e"-18Locking Nut* STD541010 #10-24 Hex Nut* STD551210 #10 Serrated Washer* 3079.00...
- Page 14 In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME °"(1-800-469-4683) Para pedir servicio de reparaci6n a domicilio - 1-800-676-5811 Au Canada pour tout le service - 1-877-LE-FOYER s"(1-877-533-8937) For the repair or replacement parts you need: Call 6 a.m.