AEG MRC 4126 P Instruction Manual page 49

Putting into function
• Select a proper place for the device such as a dry, and even non slip area where you
can easily operate the device.
• If still in place, remove the protection foil from the display.
Inserting the power reserve battery
(not supplied)
If there is a power cut or the mains plug has been removed from the power socket, the
settings will be retained if the power reserve batteries are inserted.
1. Open the battery compartment on the underside.
2. Connect a 9 V, E compound battery to the supply connection. Please ensure the cor-
rect polarity.
3. Close the battery compartment again.
4. If the device is not used for a prolonged period of time, please take the batteries out in
order to prevent leakage of battery acid.
CAUTION:
Batteries are not to be disposed of together with domestic wastes. Dispose of the used
batteries at the relevant collection bin or at your dealer' s .
WARNING:
Do not expose the batteries to high temperatures or direct sunlight. Never throw batter-
ies into the fire. There is a danger of explosion!
Power supply
• Insert the grid plug into a properly installed three prong socket.
• Make sure the grid voltage corresponds to the figures on the rating plate.
• If you have not inserted a backup battery, the stored clock time will be lost as soon as
the power supply is interrupted.
Radio station tuning
1. Move the function switch (19) to the ON position.
2. Turn the tuning control in order to tune in to a station.
3. If reception is too weak, change the position of the dipole antenna in order to improve
the reception.
English
49