Displaying Stored Results - AEG BMG 5610 Instruction Manual

English
126
c. After selecting the memory bank, the monitor starts to seek zero pressure. See Fig. 6-3.
d. The monitor inflates the cuff until sufficient pressure has built up for a measurement. Then the
monitor slowly releases air from the cuff and carries out the measurement. Finally the blood
pressure and pulse rate will be calculated and displayed on the LCD screen separately. Irregular
heartbeat symbol (if any) will blink. See Fig. 6-4 & 6-5. The result will be automatically stored in
the current memory bank.
Fig. 6-3
e. After measurement, the monitor will turn off automatically after 1 minute of no operation. You
can also press the "START" button to turn off the monitor manually.
f. During measurement, you can press the "START" button to turn off the monitor manually.
Note:
Please consult a health care professional for interpretation of pressure measurements.
7.

DISPLAYING STORED RESULTS

a. After the measuring, you can review the measurements in the current memory bank by pressing
the button "MEM". Now the LCD displays the amount of the results in the current bank. See
Fig. 7.
Fig. 6-4 Fig. 6-5