Clock And Date Adjustment - AEG BMG 5610 Instruction Manual

The monitor, the batteries and the cuff, must be disposed of according to local regulations at the
end of their usage.
2.

CLOCK AND DATE ADJUSTMENT

a. Once you install the battery or turn off the monitor, it will enter Clock Mode, and LCD will display
time and date by turns. See Fig. 2 & 2-1.
Fig. 2
b. While the monitor is in Clock Mode, pressing the "START" button and the "MEM" button simul-
taneously; a beep is heard and the month will flash first. See Fig. 2-2. Press the button "START"
repeatedly; the day, the hour and the minute will flash in turn. While a number is flashing, press
the button "MEM" to increase the number. Hold the button "MEM" depressed, the number will
increase rapidly.
c. You can turn off the monitor by pressing the "START" button when the minutes are flashing,
then the time and the date are confirmed.
d. The monitor will turn off automatically after 1 minute of no operation; with the time and date
unchanged.
e. After replacing the batteries, you should set the time and the date again.
Fig. 2-1
English
Fig. 2-2
123