Technical Specifications - AEG HSM 5597 N Instruction Manual

English
58
1. Switch off the appliance before cleaning.
2. Remove the battery from the battery compartment.
3. Loosen the shaving head by turning it anticlockwise and remove it.
4. Remove remaining hair from the blade holder using the cleaning brush. You can also
blow off the remaining hair from the holder.
5. Place the shaving head onto the blade holder again. Turn it tight clockwise until it
snaps audibly into place.
6. Put the transparent protection cap back on.
Noise emission
The workplace-related emission value is less than 70 dB(A).

Technical Specifications

Model: ..........................................................................................................................HSM/R 5597 NE
Net weight incl. adapter: ......................................................................................... approx. 0.267 kg
Power adapter (Hair and beard clippers)
Protection class: ......................................................................................................................................II
Power supply: ............................................................................ AC 100-240 V, 50/60 Hz, 0.2 A max.
Output: .................................................................................................DC 3.0 V, 600 mA, 1.8 W max.
Rechargeable battery (Hair and beard clippers): ...............................2 x 1.2 V, 600 mAh NiMH
Run time: ......................................................................................................................max. 45 minutes
Charging time: ............................................................................................................................ 8 hours
Battery (Nose and ear hair trimmer): ..............................1x 1.5 V, Typ: MIGNON LR6, AA, UM3
Subject to change without prior notice!
This device complies with all current CE directives, such as electromagnetic compatibility
and low voltage directive and is manufactured according to the latest safety regulations.
Remove / Dispose of Rechargeable Batteries
Hair and beard clippers
This unit is equipped with a rechargeable Ni-MH battery.
Remove the battery before disposing of the unit.
As a consumer you are legally bound to return exhausted batteries/rechargeable batteries.
WARNING:
Disconnect from mains power supply before removing the battery!