Making Copies; Copy Settings; Stop Copying; Enlarging Or Reducing The Copied Image - Brother DCP-J140W Advanced User's Manual

3

Making copies

Copy settings

When you want to quickly change the copy
settings temporarily for the next copy, use the
Copy keys. You can use different
combinations of settings.
If you want more than one copy, press
Number of Copies repeatedly until the
number of copies you want appears (up to 99).
Or press a or b to change the number of
copies.
When you have finished changing settings,
press Mono Start or Colour Start.
The machine returns to its default settings
1 minute after it finishes copying.
Note
You can save some of the copy settings
you use most often by setting them as the
default. You can find instructions on how
to do this in the section for each feature.

Stop copying

To stop copying, press Stop/Exit.
4
Enlarging or reducing the
3
copied image
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
Press
a
Load your document.
b
Enter the number of copies you want.
c
Press Enlarge/Reduce.
d
Do one of the following:
 Press a or b to choose the
3
enlargement or reduction ratio you
want. Press OK.
Press a or b to choose

Custom(25-400%). Press OK.
Press a or b repeatedly to enter an
enlargement or reduction ratio from
25% to 400%. Press OK.
e
Press Mono Start or Colour Start.
Fit to Page
Custom(25-400%)
198% 10x15cmiA4
186%10x15cmiLTR
141% A5iA4
100%
97% LTRiA4
93% A4iLTR
83%
69% A4iA5
47% A4i10x15cm
3
3