Auto Power Off; Lcd Display; Changing Lcd Language; Lcd Contrast - Brother DCP-J140W Advanced User's Manual

Chapter 1

Auto Power Off

The Auto Power Off feature will turn the
machine off one hour after entering Sleep
Mode. When this feature is Off, the machine
will not power off automatically.
Note that the machine will not power off
automatically when:
 the machine is connected to a wireless
network
 On is selected in the WLAN Enable
setting
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
5.Auto Power Off.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
e
Press Stop/Exit.
2

LCD display

1

Changing LCD language

You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
0.Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.

LCD Contrast

You can adjust the LCD contrast. If you are
having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
2.LCD Contrast.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
1
1
1