Polaris 600 IQ Racer Owner's Manual page 92

MAINTENANCE
Track Maintenance
Track Tension
Track adjustment is critical for proper handling. Always maintain cor-
rect tension and alignment.
Suspension
600 IQ Racer
TIP: Tension adjustments should be made only after the track is warmed up and
limber.
1. Turn the engine off.
2. Lift the rear of the machine and safely support it off the ground.
3. Place the recommended weight or downward pressure on the track
at the specified distance (see chart) ahead of the center of the rear
idler wheel.
4. Measure at the point where the weight is hanging.
88
TRACK TENSION DATA CHART
Slack Measurement
1 1/4"-1 1/2" (3.2-3.8 cm)
Measurement
Weight
Location
10 lbs. 16" (40 cm)
(4.54 kg) ahead of rear
idler shaft