Handlebar Adjustments; Handlebar Position; Handlebar Angle - Polaris 600 IQ Racer Owner's Manual

Handlebar Adjustments

Handlebar Position

1. Loosen the four bolts on the
bottom of the adjuster block.
If necessary, pry the blocks
apart with a screwdriver.
2. Adjust the handlebar forward
or rearward to the desired
position.
3. Tighten the bolts.

Handlebar Angle

1. Loosen the four bolts on the
top of the adjuster block. If
necessary, pry the blocks
apart with a screwdriver.
2. Adjust the handlebar forward
or rearward to the desired
angle.
3. Tighten the bolts.
Accessories
POLARIS offers a wide range of accessories for your snowmobile to
help make each ride more enjoyable.
Use only POLARIS parts and accessories on your POLARIS snowmo-
bile. Use of unapproved parts and accessories may result in:
• Non-compliance with government/industry requirements
• Voiding of warranty
• Injury to self or others
This applies, but is not limited to the following areas: brakes, clutches,
fuel systems, and exhaust systems. Exhaust systems are critical safety
areas that must use approved POLARIS parts. Please see your
POLARIS dealer for service.
THE PERFECT FIT
Loosen top bolts to adjust
handlebar angle
Loosen bottom bolts to
adjust handlebar position
37