Advertisement
Replacing the saw blade
Do not replace with saw blade bigger than
To replace the saw blade, grip the outer
flange with a wrench (22). then remove the
hex bolt with a socket wrench. The blade
comes off easily.
4-318
"
.
Fig.
1 0
MAINTENANCE
CAUTION:
Always be sure that the tool
is
switched off and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly Replace when they wear down to
the limit mark Keep the carbon brushes
clean and free to slip in the holders Both
carbon brushes should be replaced at
the same time Use only identical carbon
brushes
Fig. 1 1
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
Brush holder
cap
Screwdriver
Fig. 12
TO maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjust-
ment should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts
9
Advertisement
