Advertisement
Rip fence (Guide rule)
The handy rip fence allows you
to
do extra-
accurate straight cuts. Simply slide the rip
fence up snugly against the side of the
stock and secure it in position with the
thumb screw on the front of the base.
It
makes repeated cuts of uniform stock
width possible, too.
I
Fig. ' 1
Sawing
For sawing. set the base plate on the wood
to be cut without the blade making any con-
tact Then switch the saw on Now simply
move the saw forward over the wood sur-
face, keeping it flat and advancing smoothly
until the sawing is completed To get clean
cuts, keep your sawing line straight and
your speed of advance uniform
Fig.
e
For bevel work
Loosen the wing nut on the bevel scale
plate on base front Set for desired angle
(0"-45") by tilting accordingly, then re-
tighten the wing nut firmly
Fig. 9
8
Advertisement
