Configuration With Wizard - D-Link DCS-5615 Quick Install Manual

4. Configuration with Wizard

Insert the DCS-5615 CD into your computer's CD-ROM drive to begin the installation. If
the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start
automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive
letter of your CD-ROM drive.
Click Setup Wizard to begin the installation.
The InstallShield Wizard window will open.
Click Next to continue.
Click Yes to accept the License Agreement.
To start the installation process, click Next.
Note: The installation may take several minutes to finish.
Click Finish to complete the installation.
9
D-Link DCS-5615 Quick Install Guide