Makita BTW074 Technical Information page 14

W
iring diagram
Fig. D-6
Route Lead wires (black, red) between
Rib A and the inner wall of Housing set (L).
Route lead wires (black, red) between
Rib A and Rib B so that they are not pinched
with Switch.
Route Lead wires (black, red) between Rib B
and the inner wall of Housing set (L).
Route Lead wires (black, red) between
the following Ribs.
* Rib of the Boss for Screw hole
* Rib of the Connector box
Wiring of Lead wires for Impact finish indicator lamp (before setting Switch)
Impact finish indicator lamp
Route the bundle of Lead wires (blue,
black, red and gray) between Rib A
and the inner wall of Housing set (L).
Route the bundle of Lead wires (blue,
black, red and gray) between Rib B
and the inner wall of Housing set (L).
Route Lead wires (blue, red and gray)
of Impact finish indicator lamp and
the connecting Lead wire (black)
between Rib C and Rib D.
Secure Lead wires of both Connectors
(4 pin) with Lead wire holders.
BTW074, BTW104
(equipped with Automatic Impact Stop System)
Wiring of Lead wires for LED (before setting Switch)
Rib C
Boss
Rib C
P 14/ 15
Rib F
LED
Rib A
Rib B
Connector (6 pin) for
connecting to Switch
Connector (4 pin) for
connecting to Impact
finish indicator lamp
Rib D
Connector box
Rib F
LED
Rib A
Rib B
Connector (6 pin) for
connecting to Switch
Rib D
Boss
Connector
(4 pin)