Page Length; Color Mode; Pure Black And Pure Gray - Toshiba E-STUDIO 281C Printing Manual

Page Length

The number of lines to print on a page can be specified with the following option.
Alternate
Option Value
Value
pl=value
As this equipment is a page printer we cannot change the physical length of a piece of paper so
the actual effect of this command is to change the value for lines per inch so that the requested
number of lines is printed on the page. The actual page length may differ from this value if the
top margin or the text length option is used.
If this option is not specified the PJL command will not be sent so the printer's default value will
be used. The minimum page length allowable is 5. If value is less than 5 page length is set to 5.
The command to specify 66 lines per page is "lp -o pl=66 filename".

Color Mode

The color mode print mode can be selected using the following options.
Alternate
Option Value
Value
colormode= color
COLOR
colormode= grayscale
GRAYSCALE
Example: The command to set the color mode for the print job is
"lp -o colormode=COLOR filename"

Pure Black and Pure Gray

The pure black and pure gray mode can be selected using the following options.
Alternate
Option Value
Value
pureblackgray=0
pureblackgray=1
Example: The command to set the pure black and pure gray mode for the print job is
"lp -o pureblackgray=1 filename"
Description
Set the lines per page to value.
Description
Set the color mode printing for the print mode.
Set the grayscale mode printing for the print mode.
Description
Disable the pure black and pure gray mode.
Enable the pure black and pure gray mode.
Printing from an Application 351