Resuming Operation - Panasonic CF-29 Series Reference Manual

Standby/Hibernation Functions

Resuming Operation

1
Slide the power switch (A).
CAUTION
Until resuming is complete (requires about 15 seconds, or 60 seconds if connected to
a network, after the display returns), avoid the following:
• Touching the keyboard (except for password input), touch pad, touchscreen(only for
models with touchscreen), or power switch.
• Using external mouse or other peripheral devices
• Connecting or disconnecting the AC adaptor.
• Closing or opening the display.
• Shutting down or restarting Windows.
• Entering either the standby or hibernation mode again.
NOTE
*1
When [Stand by] or [Hibernate] is selected as the setting for [When I close the lid of
my portable computer] in the following menu, the computer will also resume when the
display is opened.
Windows XP
[Start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Power Options] - [Advanced]
Windows 2000
*1
[Standby]
Windows 2000
When the computer enters standby/hibernation mode and then resumes while a USB
1.1 device (e.g., USB floppy disk drive (optional)) is connected, a device
disconnection warning message may appear on the screen, but this will not impede
the computer's operation.
36