General Set Up Screen - GE 040350 Operator's Manual

General Set Up Screen

For general set up, press and hold the left arrow and right arrow
NOTE: Date and Time were set at the factory and stored in the control panel memory. The Exercise Cycle was also set at
the factory. The default exercise cycle occurs on Tuesdays, at 2:00 p.M. Central Standard Time. To update or change these
settings, follow the steps below.
SET DATE
or
SET TIME
or
SET EXERCISE
CYCLE
EVENT LOG
YEAR
FLASHING
or
HOURS
FLASHING
or
or
DAY OF WEEK
FLASHING
or
Display will scroll last service code event, date, time,
and ambient temperature of when the event occurred.
IF DURING PROGRAMMING NO BUTTONS ARE PRESSED FOR 30 SECONDS,
THE CONTROL PANEL WILL AUTOMATICALLY EXIT THE PROGRAM MODE.
ok
ok
for 3 seconds. Follow the prompts as outlined below.
MONTH
FLASHING
or
MINUTES
FLASHING
or
If set to OFF, display will read:
EXERCISE CYCLE OFF
HOURS MINUTES
FLASHING FLASHING
or
DAY##
FLASHING
or
AM/PM
FLASHING
or
or
AM/PM
FLASHING
or or
or
17