Side - D-Link DHP-W307AV User Manual

Section 1 - Product Overview
1
2 WPS/Simple Connect LED
3
4
Simple Connect Button
D-Link DHP-W307AV User Manual
Hardware Overview
1
Reset Button Press and hold the button for 2 seconds to reset to factory default.
When enabling WPS, the light will blink during broadcast. Once connected, the LED will remain lit
5 seconds and then will turn off. The LED will start blinking after the Encryption button is pushed.
The LED will turn off once the PowerLine AV is connected to a PowerLine network.
Press to start the WPS process. You will have 120 seconds to start the WPS process on another
wireless device.
WPS Button One Touch AP Configuration
1. Press the WPS button on your wireless router or access point. The WPS LED will flash on and off.
2. Press the WPS button on the DHP-W307AV and hold it for 5 seconds.
Push this button to establish a secure Powerline network with other PowerLine AV devices.

Side

3
2
4
9